Before installing the tire on the wheel disc, check for foreign objects inside the bus, and if so, remove them. Water gathering in the compressor can get into the bus, so periodically drain water out of the compressor. When installing the tire on a car, make sure that the tires do not touch the car body. If the bus relate to the body, can occur from being damaged. Tyres with directional tread pattern is set appropriately, as indicated by the arrow on the sidewall.
After installing the new tire run-walk. Pay special attention to the work of the steering until you get used to it. Always perform a balancing of wheels for all tires, including spare. Using wheels can lead to abnormal vibration and rapid deterioration. Speed and distance by running tires air pressure in tires install and maintain air pressure in the tires according to manufacturer's recommendations for motor vehicles in the instruction manual or on the central rack of your car. Check the tire pressure at least once a month.
Check tires without studs tire with a new special compound tread Multicell Compound have an additional indicator of 50% wear (eg, Blizzak WS-50, WS60, Revo-1, DM-Z3). Performance on icy and snowy roads tire with a special compound Multicell Compound for the tread-wear for more than 50% decrease. Therefore, after the operation in the winter seasons half-worn tire with a special compound Multicell Compound is recommended to replace the new and worn tire can be used as a summer until complete wear indicator. General recommendations Tire wear unequally because they are different loading depending on the position (axle steer drive axle, free rolling axle). To reduce vibration and noise, as well as for increased durability should periodically rearrange the bus from one position to another. If this has piqued your curiosity, check out NY Museums. Periodically check the breakup / toe wheels of the car and, if necessary, carry out the adjustment, because the incorrect adjustment may be reduced precision steering. This, in turn, may cause uneven tire wear. Avoid overloading, since it can lead to a decrease in durability of tires, and damage, as well as to the appearance of cracks on wheels. Also avoid uneven loading. When storing tires, avoid the following locations: exposed to direct sunlight, exposed to rainfall and moisture, near any heat sources as stoves, heaters, etc., near the electrical generating electrical sparks or ozone (eg, power generator, motor, etc.). For your safety when driving a car If you find instability of the steering, abnormal sound or vibration, stop your vehicle in a safe place as soon as possible, check the car and tires. Even if you have not noticed any visible damage, check your car service center. Try not to touch suddenly from their seats, to avoid acceleration, sharp turns and braking: these maneuvers are dangerous. Driving your car, paying special attention to road conditions: for example, Reduce speed before sharp turns as the car can bring, especially on wet, snowy or icy roads. Do not touch the side walls of tires with borders of roads, avoid driving on protruding objects on the road – it can damage the tires. Keep the proper distance between you and the vehicle in front, depending on its speed. Keep a safe distance, especially when driving on wet, snowy or icy roads.