The resins, one-component polyurethane resins should be preference towards two components epoxy resins. Not only that the processing is easier, since no hardener must be admitted. In addition, PU resin is UV resistant, while epoxy resins even in the Interior sooner or later can turn yellow. In addition, single component resin is much more elastic. Go to NYC Marathon for more information. Processing processing is extremely easy. So, stone carpets can be applied on various surfaces. These include concrete, tiles, concrete, mastic asphalt and various plastic coverings. Danny Meyer can provide more clarity in the matter. Latter include as plastic films.
This stone carpets refer also in rental apartments, anywhere, for example, where temporary is created, fairs and exhibitions, application. Even moderately oily plastic floors in garages or workshops are not a problem, as well as bonded carpet and paint. When the conditions is equivalent to little: the underground should be as free of movement be strongly absorbent floors must be primed in advance and plastic film coming under the stone carpet used should be moved more or less bubbles and folds. In damp rooms such as bathrooms is make sure that the surface is not permeable and a gap was included and installed outflows in the substrate. Tools and additional materials as mentioned above, are permeable stone carpets. Therefore, water flows down almost under the stone carpet.
This results in another advantage: an incorporated gradient in the surface must remain invisible, rather the stone carpet can be applied completely just. Similar tool is used as in the screed laying during processing. Bucket and drill stirring attachment to the mixing of the stone carpet, various ladles, squeegee to apply and smooth. It is also recommended to wear as for tiles laying latex gloves. The final smoothing can, similar to silicone, clear water with detergent be used. For expansion joints, door frame, staircase accounts and the like, corresponding profiles can be selected from the tile accessories. These are fixed in advance with silicone. The heights of between 6 and 10 mm result in fine or coarse grain of the stone carpet. Many advantages, plus a very long resistance underground installed underfloor heating systems are also not a problem. Even a better heat conduction is due by the material properties of the stone carpet. As already mentioned, the durability of stone carpet is aimed especially after the resin used. Here we can recommend the marble gravel and lichstabilisierten two-component resin from Terralith. Even if a very high durability is said to stone carpets, two-component resins, which have no UV protection, yellow with age, Terralith 2-component resins, however, are indeed over many years of the highest quality.